The A&M-Nikuni KTM microbubble pump trial unit is available with either SS304 or SS316 wetted parts for proving concepts, research projects and small scale systems. Bespoke units are available and a 230VAC 1 phase 50Hz motor is fitted as standard.
A&M-Nikuni KTM pump trial unit
In order to provide industrial clients, researchers and special applications a means of proving the Nikuni KTM pump for their purpose, the Nikuni KTM pump trial unit is modified by A&M in the UK.
The trial unit can be supplied with all wetted parts in SS304 or SS316 stainless steel. Customisation is possible and special bespoke units are frequently ordered for specific research projects.
Each trial unit is offered as a complete plug-and-play ready-to-run system. Gasses used through the trial unit include:
Ambient air
Hot air at >100°C
Oxygen
Hydrogen
Ozone
Nitrogen
Chlorine
Carbon Dioxide
Flue gas mixes
Methane etc.
Standard basic specification includes:
Nikuni KTM20N monoblock pump
Robust polypropylene base
SS304 or SS316 wetted parts
16.6 lpm pump flow
Fine bubble discharge at an average bubble diameter of 25µm
Multi-voltage 50/60hz IE3 rated motor professionally wired for 230VAC 50Hz operation
Industrial class on/off isolator c/w overload
2.5m power cable c/w 13A 3 pin plug
Suction line gate valve (3/4" BSPP threaded ports)
Suction line compound gauge (-1bar to + 2.5bar)
Gauge isolator valve
Air/gas inlet valve c/w shunt type inline check
Air/gas flowmeter (0 to 5 N/lpm)
Air/gas line isolator valve
Discharge line pressure gauge (0 to 10 bar)
Discharge line gauge isolator valve
Discharge line swing-check valve
Excess air tank in PVC
Excess air vent valve c/w float
Discharge line gate valve (1/2" BSPP threaded ports)
Fully assembled and tested on tap water
CE Marked in the UK
Options:
Excess air tank in SS316
Excess air tank in SS316 with bolt-on flanged top hat
All SS316 pipework and connections
Ozone/oxygen/hydrogen/methane/chlorine etc. gas line linked isolator valve
Air/gas flowmeter with dedicated (specific) gas scale
Controls package with additional inputs/outputs
Trial unit applications:
Microbubble/fine bubble research projects
Research projects requiring microbubbles/fine bubbles of air or a specific gas
Small scale aeration projects
Research trials
Spa bath treatments
Fish farm tank treatments
Feeding algae with different anaeraobic gas mixes
Depuration of shellfish
Sterilization of systems using ozone
Trial preparation of bottled water systems
Trials of CIP using ozone in industrial systems
Aeration & Mixing welcomes enquiries for A&M-Nikuni trial units for small projects, pre-large scale installations and research activities.
Visit the Aeration & Mixing Ltd website for more information on Nikuni KTM microbubble pump trial unit available in SS304/SS316