High Flow 2 Part Metering for Casting

Larger castings need a high, steady flow of mixed resin. High flow 2 part metering fills big moulds quickly at the correct ratio, without the inconsistency of mixing in buckets. Continuous flow metering systems use mass flow technology to simplify robotic application of sealants and adhesives. Flow is measured and controlled in real time rather than dispensed in fixed shots. Two part continuous flow systems meter both materials at the set ratio and keep them flowing through the mixer for as long as the job needs, ideal for long beads, large parts and high output. Materials handled include polyurethane and epoxy resins, acrylics, silicones, methyl methacrylate, polysulphides and thermal pastes, from low viscosity fluids right up to thick thixotropic pastes, across a wide spread of two part mix ratios. Buyers usually come to Rockingham Systems with one of three problems: too much material wasted, too many rejects, or a manual process that cannot keep up. Metered dispensing tackles all three.

The payback is simple. Less material wasted, fewer rejects, faster cycle times and a process you can repeat and document. Talk through your material, ratio and output with the Rockingham Systems UK sales team on +44 (0) 1536 628 734. Service and consumables contracts are available.